Destinator 6 Support

Frequently Asked Questions

 
Which accessories do I need to operate Destinator 6 for PDAs?

In addition to Destinator navigation software, you will need a PDA and a GPS receiver. If the GPS receiver cannot be connected to the PDA via Bluetooth you will require the appropriate connection cable. A storage card is advisable if you do not wish to store the map material in the PDAs main memory. We also recommend the use of a 12 volt charging cable and PDA holder when using the device in a car.

back to top

How do I install Destinator 6 on my PDA?

There are two possibilities of installing Destinator 6 on your PDA:

  1. You have acquired Destinator 6 which has been preinstalled on an SD-Card.
  2. You would like to install Destinator 6 from the CD.

back to top

How do I install Destinator 6 on to my PDA from the SD storage card?

The software and the digital map material or part of it is already pre-installed on the SD-card. You only have to follow the following steps to install the software on your PDA:

  • Put the SD-Card into the device's SD-slot
  • The software will be automatically installed.

Do not remove the storage card from the device during installation and while Destinator is running. The SD-Card must be in the PDA's card slot whenever the software is being used because the map material is stored there.

Destinator will start automatically once installation is complete. Activation of the software is not necessary. It is, however, recommended that you register your product. The registration code can be found in the packaging.

back to top

How do I install Destinator 6 on my PDA from CD?

Please follow the following steps in order to install Destinator 6 on your PDA from CD:

Before installing:

  • Connect your PDA to your PC.
  • Establish a connection via ActiveSync (the software can be found on the CD supplied with the PDA):

1. Install the console on your PC:

  • Put CD (1) in your computer's CD drive.
  • The Destinator 6 Console installation program will start automatically.
  • Select the desired language and click OK.
  • Click on Next in the next window.
  • Select the 'Destination Folder' where the Console is to be installed to. It is recommended that you use the suggested location. Click on Next.
  • Installation begins.
  • Close the installation program by clicking on Finish.
  • The Destinator Console can be found in the Start Menu (DestinatorApps) and started from there.

2. Installing the software on your PDA:

  • Start the Console from the Start Menu.
  • Click on 'Install Software'.
  • Select the languages which are to be installed in addition to the console language (Recommendation: no more than three additional languages should be installed).
  • Click on OK.
  • Confirm the installation of the software to the standard directory on the PDA with Yes.

If you have a previous version of Destinator on your PDA you will be asked whether the Destinator version on your PDA should be overwritten or deleted. Please answer this question with yes.

3. Transferring map data to your SD-Card:

  • Select the desired maps/countries (be aware of the size of your storage card).
  • Click on Change under Target Device and select Storage Card.
  • Click on Install/Remove Maps in the upper menu.

The map data will now be transferred. This can take some time. Successful transfer will be confirmed at the end of the transfer process. Destinator 6 can now be started on your PDA. Click on the Destinator symbol in the Start Menu.

back to top

Where can I find the user manual for Destinator 6 for PDAs?

You will find the user manual for your software on the Destinator 6 CD.

back to top

Does Destinator 6 have to be activated?

No. This is, under normal circumstances, not necessary. You can immediately start navigating and drive off once you have installed the software on your PDA.

back to top

Does Destinator 6 have to be registered?

Registration isn't necessary but is recommended in order to receive updates. You can register in the Registration Area. You will need the license key supplied with your product.

back to top

Where can I find the license number for my version of Destinator 6?

The license number can either be found as a sticker on the paper CD case your Destinator 6 came in or on the inside of the CD-box. We advise you to make a note of this number and keep it in a safe place since it proves that you are the legitimate owner of a version of Destinator 6.

back to top

Which maps are available for Destinator 6 for PDAs and how up-to-date are they?

Destinator 6 for PDAs comes with NAVTEQ map material covering the whole of Western and Eastern Europe including Advanced MRE (Major Roads of Europe). Map material data as of: Q1 2006. Please refer to your reseller about the availability of other maps.

back to top

What possibilities does Destinator offer to automatically avoid traffic jams?

The standard version, Destinator 6 for PDAs, offers the possibility of using Free TMC. You will require a TMC capable GPS receiver to take advantage of this service. The premium variant, Destinator 6 & TrafficSam, makes the use of Premium-TMC-Services across international boundaries.

back to top

What are the minimum system requirements for Destinator 6 for PDAs?
Minimum System Requirements PDA:
  • Operating System: Windows Mobile™ 2003 SE and 5.0 and 6.0
  • Memory: min. 64 MB RAM
  • Storage Card: 256 MB (recommended) SD/MMC/CF
  • GPS Receiver Interface: Bluetooth®, USB or serial
  • Additional Hardware for the free TMC Function: TMC capable GPS receiver
  • Additional Hardware for the SMS Text Function: Pocket PC Phone Edition
Minimum System Requirements Desktop PC:
  • Processor: AMD/Intel® Processor (300 MHz or higher)
  • Operating System: Microsoft® Windows® 2000/XP
  • Memory: 256 MB RAM (or more)
  • Min. 500 MB free hard drive space
  • Min. 4 X CD ROM drive

back to top

Which languages are supported?

The following languages are supported by Destinator 7:

  • Czech
  • Danish
  • Dutch
  • English
  • English UK
  • French
  • French Canadian
  • German
  • Greek
  • Hungarian
  • Italian
  • Norwegian
  • Polish
  • Portuguese
  • Russian
  • Simplified Chinese
  • Spanish
  • Spanish US
  • Swedish
  • Traditional Chinese
  • Turkish

back to top

I already own Destinator software. Where can I get an upgrade to Destinator 6?

Please ask your local retailer.

back to top

I own a PDA navigation system from another manufacturer. Is there the possibility of a Cross-Upgrade?

Yes. Please ask your local specialist retailer for more information.

back to top

Is there a support hotline which can answer any additional questions I might have?

Please note that Intrinsyc does not provide direct phone or email assistance to end users of products incorporating Destinator software. For support issues, consult your local reseller.

back to top